Sail E0 Webinar

MCQs

Total Questions : 206 | Page 1 of 21 pages
Question 1. The power loss is an important factor for the design of
  1.    transmission line
  2.    motor
  3.    generator
  4.    feeder
 Discuss Question
Answer: Option A. -> transmission line
Question 2. The single phasing relays are used for the protection of
  1.    single phase motors only
  2.    two phase motors only
  3.    two single phase motors running in parallel
  4.    three phase motors
 Discuss Question
Answer: Option D. -> three phase motors
Question 3. The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to
  1.    lubricate the contacts
  2.    insulate the contacts from switch body
  3.    extinguish the arc
  4.    all of the above
  5.    none of the above
 Discuss Question
Answer: Option C. -> extinguish the arc
Question 4. To limit short-circuit current in a power system are used
  1.    earth wires
  2.    isolators
  3.    H.R. fuses
  4.    reactors
 Discuss Question
Answer: Option D. -> reactors
Question 5. Series capacitors are used to
  1.    compensate for line inductive reactance
  2.    compensate for line capacitive reactance
  3.    improve line voltage
  4.    none of the above
 Discuss Question
Answer: Option A. -> compensate for line inductive reactance
Question 6. In a single bus-bar system there will be complete shut down when
  1.    fault occurs on the bus itself
  2.    fault occurs on neutral line
  3.    two or more faults occur simultaneously
  4.    fault occurs with respect to earthing
 Discuss Question
Answer: Option A. -> fault occurs on the bus itself
Question 7. A differential relay measures the vector difference between
  1.    two currents
  2.    two voltages
  3.    two or more similar electrical quantities
  4.    none of the above
 Discuss Question
Answer: Option C. -> two or more similar electrical quantities
Question 8. With which of the following, a circuit breaker must be equipped for remote operation ?
  1.    Inverse time trip
  2.    Time-delay trip
  3.    Shunt trip
  4.    None of the above
  5.    All of the above
 Discuss Question
Answer: Option C. -> Shunt trip
Question 9. A switchgear is device used for
  1.    interrupting an electrical circuit
  2.    switching an electrical circuit 111
  3.    switching and controlling an electrical circuit
  4.    switching, controlling and protecting the electrical circuit and equipment
 Discuss Question
Answer: Option D. -> switching, controlling and protecting the electrical circuit and equipment
Question 10. A _______ is used to measure the stator % winding temperature of the generator.
  1.    thermocouple
  2.    pyrometer
  3.    resistance thermometer
  4.    thermometer
 Discuss Question
Answer: Option C. -> resistance thermometer

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI
Tabulation - Test Paper 2 Data Interpretation Reasoning & DI
Test Paper 1 Direction Sense Test Reasoning & DI
ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0
GFM Combined 1 Free Revision Test SAIL JO E-0