Sail E0 Webinar

MCQs

Total Questions : 271 | Page 1 of 28 pages
Question 1. Degree of static indeterminacy of a rigid-jointed plane frame having 15 members, 3 reaction components and 14 joints is
  1.    2
  2.    3
  3.    6
  4.    8
 Discuss Question
Answer: Option C. -> 6
Question 2. For heavily reinforced concrete member, the nominal maximum size of the aggregates should be restricted to
  1.    5 mm less than the minimum clear distance between the main bars
  2.    5 mm less than the minimum cover to the reinforcement
  3.    Smaller of A and B
  4.    Greater of A and B
 Discuss Question
Answer: Option C. -> Smaller of A and B
Question 3. The fixed support in a real beam becomes in the conjugate beam a
  1.    Roller support
  2.    Hinged support
  3.    Fixed support
  4.    Free end
 Discuss Question
Answer: Option D. -> Free end
Question 4. When a series of wheel loads crosses a simply supported girder, the maximum bending moment under any given wheel load occurs when
  1.    The centre of gravity of the load system is midway between the centre of span and wheel load under consi-deration
  2.    The centre of span is midway between the centre of gravity of the load system and the wheel load under consideration
  3.    The wheel load under consideration is midway between the centre of span and the centre of gravity of the load system
  4.    None of the above
 Discuss Question
Answer: Option B. -> The centre of span is midway between the centre of gravity of the load system and the wheel load under consideration
Question 5. The maximum bending moment due to a train of wheel loads on a simply supported girder
  1.    Always occurs at centre of span
  2.    Always occurs under a wheel load
  3.    Never occurs under a wheel load
  4.    None of the above
 Discuss Question
Answer: Option B. -> Always occurs under a wheel load
Question 6. When a uniformly distributed load, shorter than the span of the girder, moves from left to right, then the conditions for maximum bending moment at a section is that
  1.    the head of the load reaches the section
  2.    the tail of the load reaches the section
  3.    the load position should be such that the section divides it equally on both sides
  4.    the load position should be such that the section divides the load in the same ratio as it divides the span
 Discuss Question
Answer: Option D. -> the load position should be such that the section divides the load in the same ratio as it divides the span
Question 7. In the displacement method of structural analysis, the basic unknowns are
  1.    displacements
  2.    force
  3.    displacements and forces
  4.    none of the above
 Discuss Question
Answer: Option A. -> displacements
Question 8. If the specified thickness of a footing is 100 cm, the depth of the form work may be tolerated from
  1.    -2 mm to +2 mm
  2.    -3 mm to +3 mm
  3.    -4 mm to +4 mm
  4.    -5 mm to +5 mm
 Discuss Question
Answer: Option D. -> -5 mm to +5 mm
Question 9. The width of the analogous column in the method of column analogy is
  1.    2/EI
  2.    1/EI
  3.    1/2 EI
  4.    1/4 EI
 Discuss Question
Answer: Option B. -> 1/EI
Question 10. For the stability of a structural part, the weight or anchorage should be
  1.    1.2 times the minimum overturning moment due to dead load
  2.    1.4 times the minimum overturning moment due to dead load
  3.    Sum of (a) and (b)
  4.    None of these
 Discuss Question
Answer: Option C. -> Sum of (a) and (b)

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI
Tabulation - Test Paper 2 Data Interpretation Reasoning & DI
Test Paper 1 Direction Sense Test Reasoning & DI
ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0
GFM Combined 1 Free Revision Test SAIL JO E-0