Sail E0 Webinar

MCQs

Total Questions : 1156 | Page 1 of 116 pages
Question 1. When a number of roads are meeting at a point and only one of the roads is important, then the suitable shape of rotary is
  1.    circular
  2.    tangent
  3.    elliptical
  4.    turbine
 Discuss Question
Answer: Option B. -> tangent
Question 2. When the path travelled along the road surface is more than the circumferential movement of the wheels due to rotation, then it results in
  1.    slipping
  2.    skidding
  3.    turning
  4.    revolving
 Discuss Question
Answer: Option B. -> skidding
Question 3. Scientific planning of transportation system and mass transit facilities in cities should be based on
  1.    spot speed data
  2.    origin and destination data
  3.    traffic volume data
  4.    accident data
 Discuss Question
Answer: Option B. -> origin and destination data
Question 4. The sequence of four stages of survey in a highway alignment is
  1.    reconnaissance, map study, preliminary survey and detailed survey
  2.    map study, preliminary survey, reconnaissance and detailed survey
  3.    map study, reconnaissance, preliminary survey and detailed survey
  4.    preliminary survey, map study, reconnaissance and detailed survey
 Discuss Question
Answer: Option C. -> map study, reconnaissance, preliminary survey and detailed survey
Question 5. The suitable surfacing material for a bridge deck slab is
  1.    sheet asphalt
  2.    bituminous carpet
  3.    mastic asphalt
  4.    rolled asphalt
 Discuss Question
Answer: Option C. -> mastic asphalt
Question 6. The maximum thickness of expansion joint in rigid pavements is
  1.    10 mm
  2.    25 mm
  3.    50 mm
  4.    100 mm
 Discuss Question
Answer: Option B. -> 25 mm
Question 7. The maximum spacing of contraction joints in rigid pavements is
  1.    2.5 m
  2.    3.5 m
  3.    4.5 m
  4.    5.5m
 Discuss Question
Answer: Option C. -> 4.5 m
Question 8. The camber for hill roads in case of bituminous surfacing is adopted as
  1.    2%
  2.    2.5%
  3.    3%
  4.    4%
 Discuss Question
Answer: Option B. -> 2.5%
Question 9. In case of summit curves, the deviation angle will be maximum when
  1.    an ascending gradient meets with another ascending gradient
  2.    an ascending gradient meets with a descending gradient
  3.    a descending gradient meets with another descending gradient
  4.    an ascending gradient meets with a level surface
 Discuss Question
Answer: Option B. -> an ascending gradient meets with a descending gradient
Question 10. Stopping sight distance is always
  1.    less than overtaking sight distance
  2.    equal to overtaking sight distance
  3.    more than overtaking sight distance
  4.    none of the above
 Discuss Question
Answer: Option A. -> less than overtaking sight distance

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI
Tabulation - Test Paper 2 Data Interpretation Reasoning & DI
Test Paper 1 Direction Sense Test Reasoning & DI
ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0
GFM Combined 1 Free Revision Test SAIL JO E-0