Sail E0 Webinar

MCQs

Total Questions : 164 | Page 1 of 17 pages
Question 1. The bedding on a cable consists of
  1.    Hessian cloth
  2.    Jute
  3.    Any of the above
  4.    None of the above
 Discuss Question
Answer: Option C. -> Any of the above
Question 2. The insulating material for a cable should have
  1.    Low cost
  2.    High dielectric strength
  3.    High mechanical strength
  4.    All of the above
 Discuss Question
Answer: Option D. -> All of the above
Question 3. Underground cables are laid at sufficient depth
  1.    To minimize temperature stresses
  2.    To avoid being unearthed easily due to removal of soil
  3.    To minimize the effect of shocks and vibrations due to gassing vehicles, etc.
  4.    For all of the above reasons
 Discuss Question
Answer: Option C. -> To minimize the effect of shocks and vibrations due to gassing vehicles, etc.
Question 4. In capacitance grading a homogeneous dielectric is used.
  1.    Yes
  2.    No
 Discuss Question
Answer: Option B. -> No
Question 5. Dielectric strength of rubber is around
  1.    5 kV/mm
  2.    15 kV/mm
  3.    30 kV/mm
  4.    200 kV/mm
 Discuss Question
Answer: Option C. -> 30 kV/mm
Question 6. The material for armouring on cable is usually
  1.    Steel tape
  2.    Galvanized steel wire
  3.    Any of the above
  4.    None of the above
 Discuss Question
Answer: Option C. -> Any of the above
Question 7. In the cables, sheaths are used to
  1.    Prevent the moisture from entering the cable
  2.    Provide enough strength
  3.    Provide proper insulation
  4.    None of the above
 Discuss Question
Answer: Option A. -> Prevent the moisture from entering the cable
Question 8. In a cable immediately above metallic sheath ________ is provided.
  1.    Earthing connection
  2.    Bedding
  3.    Armouring
  4.    None of the above
 Discuss Question
Answer: Option B. -> Bedding
Question 9. In capacitance grading of cables we use a _________ dielectric.
  1.    Composite
  2.    Porous
  3.    Homogeneous
  4.    Hygroscopic
 Discuss Question
Answer: Option A. -> Composite
Question 10. The insulating material for cables should
  1.    Be acid proof
  2.    Be non-inflammable
  3.    Be non-hygroscopic
  4.    Have all above properties
 Discuss Question
Answer: Option D. -> Have all above properties

Latest Videos

Latest Test Papers