Shape factor is a property which depends Options: A . &nbsponly on the ultimate stress of the material B . &nbsponly on the yield stress of the material C . &nbsponly on the geometry of the section D . &nbspboth on the yield stress and ultimate stress of material

Shape factor is a property which depends

Question

Shape factor is a property which depends

Options:

A . only on the ultimate stress of the material

B . only on the yield stress of the material

C . only on the geometry of the section

D . both on the yield stress and ultimate stress of material

Answer: Option C

Submit Your Solution Below and Earn Points !

Next Question

Question 1. If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will....suitable size of rivet as per Unwin’s formula will be

Question 2. Horizontal stiffener in a plate girder is provided to safeguard against....

Question 3. The capacity of the smallest pressed steel tank is....

Question 4. The maximum slenderness ratio of a steel column, the design of which is governed by wind or seismic forces is....

Question 5. The slenderness ratio of lacing bars should not exceed....

Question 6. The least dimension in case of a circular column of diameter D is taken as....

Question 7. Bolts are most suitable to carry....

Question 8. The overlap of batten plates with the main members in welded connections should be more than (where t = thickness of the....more than (where t = thickness of the batten plate)

Question 9. Intermediate vertical stiffeners in a plate girder need be provided if the depth of web exceeds (where t is thickness of....depth of web exceeds (where t is thickness of web)

Question 10. The mechanism method and the statical method give....

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI

Tabulation - Test Paper 2 Data Interpretation Reasoning & DI

Test Paper 1 Direction Sense Test Reasoning & DI

ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0

GFM Combined 1 Free Revision Test SAIL JO E-0