An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm², the beam Options: A . &nbspIs safe in shear B . &nbspIs safe with stirrups C . &nbspIs safe with stirrups and inclined bars D . &nbspNeeds revision of section

An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it car

Question

An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm², the beam

Options:

A . Is safe in shear

B . Is safe with stirrups

C . Is safe with stirrups and inclined bars

D . Needs revision of section

Answer: Option D

Submit Your Solution Below and Earn Points !

Next Question

Submit Solution

More Questions on This Topic :

Question 1. A pre-stressed rectangular beam which carries two concentrated loads W at L/3 from either end, is provided with a bent t....parallel to the longitudinal axis, the maximum dip h is

Question 2. According to I.S. : 456, slabs which span in two directions with corners held down, are assumed to be divided in each di....strips such that the width of the middle strip, is

Question 3. If the permissible compressive stress for a concrete in bending is C kg/m², the modular ratio is....

Question 4. In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at....

Question 5. On piles, the drop must be at least....

Question 6. If a bent tendon is required to balance a concentrated load W at the centre of the span L, the central dip h must be at ....span L, the central dip h must be at least

Question 7. A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm² steel. If the mod....(m) is 15, the depth of the neutral axis, is

Question 8. As per IS : 456, the reinforcement in a column should not be less than....

Question 9. If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than....

Question 10. The diameter of main bars in R.C.C. columns, shall not be less than....

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI

Tabulation - Test Paper 2 Data Interpretation Reasoning & DI

Test Paper 1 Direction Sense Test Reasoning & DI

ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0

GFM Combined 1 Free Revision Test SAIL JO E-0

Submit Solution

More Questions on This Topic :

Latest Videos

Latest Test Papers